HP-CWT-XX-W122-5 Shrink Soldersleeve With Lead
2017-07-11 23:31  Visit:182
Price:Unfilled
Send inquiry

■ Application:

Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation .Pre-fluxed solder provides controlled soldering process.These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an insulation rated for at least +85°C, meeting the dimensional criteria listed in the table above.
 One piece with lead design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire dimension.

■ Characteristics:

●Shrinkage ratio 2:1
 ●Waterproof for wiring splices
 ●Transparent sleeve provides precise inspection
 ●Easy control soldering process      
 ●Minimum Shrink Temp. 60℃
 ●Minimum Fully Recover Temp.110℃
 ●Fully melt temperature of solder: 138℃

;

 

 

■ Technical Data:

 
Operating temperature -55℃~125℃
voltage Resistant >600V
Protection type IP67
Volume Resistivity (Ω cm) ≥10 15
Dielectric Strength (KV/mm) ≥25

 Size:      

 

 

 
 

 
Product Code Product Dimensions Cable Dimensions
Φ A Min (mm)

Φ B Min (mm)

L Max (mm)

Φ D Max (mm) Φ E Min (mm) Φ F Min (mm) Φ G Max (mm) J
HP-CWT-3-W122-5 2.5(0.098) 3(0.118) 24.5(0.965) 3(0.118)
1.5(0.059) 1(0.04) 2.5(0.098)

7.00±0.50

(0.276±0.020)

HP-CWT-5-W122-5 4.3(0.169) 4.8(0.189) 29.3(1.154) 4.8(0.189) 2(0.079) 1.5(0.059) 4.3(0.169)

9.00±0.50

(0.354±0.020)

HP-CWT-6-W122-5 6(0.236) 6.7(0.264) 32(1.26) 6.7(0.264)
3.3(0.13) 2.8(0.11) 6(0.236)

10.00±0.50

(0.394±0.020)

HP-CWT-7-W122-5 6.4(0.252) 7.3(0.287) 32.5(1.28) 7.3(0.287) 3.3(0.13) 2.8(0.11) 6.4(0.252)

12.00±1.00

(0.472±0.040)

HP-CWT-9-W122-5 8.7(0.343) 9.2(0.362) 35.5(1.398) 9.2(0.362)
4.5(0.177) 4(0.157) 8.7(0.343)

13.00±1.00

(0.512±0.040)

HP-CWT-11-W122-5 10(0.394) 11.5(0.453) 35.5(1.398) 11.5(0.453) 4.5(0.177) 4(0.157) 10(0.394)

13.00±1.00

(0.512±0.040)

HP-CWT-13-W122-7 13(0.512) 15(0.591) 45.5(1.791) 15(0.591) 7(0.276) 6.5(0.256) 13(0.512)

17.00±1.00

(0.669±0.040)

Other sizes are available upon request.

●Item 1 : Heat shrinkable Sleeve , Transparent ,Radiation cross-linked modified polyolefin.
 ●Item 2:  Solder Ring with flux.
●Item 3: Glue rings


 Color:
 Standard color: White, Red, Blue,Yellow
 Other colors are available upon request.

Message

TO: hp201509

E-mail:

Content:

Contact information
Comment
0